We are offering a wide range of Online Under Pressure Drilling
is used to Drill and Tap in running water line while under pressure. It make the hole and tap up to 2' in Single operation without electricity. Machine is recommended for connection ferrules to drinking water mains for connection to the consumer without stopping water line. It is unique design and involves engineering challenges so that it is capable of Dining and Tapping on Cast iron, Ductile Iron Steel and Asbestos cement pipes of various diameters and inserting ferrules directly in to the wall oil water man or through a saddles strap where these may fitted to Support the ferrule.
- Diameter 72" with tapping range Size 1/2"-2" available in two models,
- its material of Feed screw, Drill Spindle, Ferrule Spindle are as per IS:1570 (Part II), 1979 or BS 970 Pat 1 150 683/1 and material for Bridle and Machine body shall be Of SG Iron IS:1865:1996 or BS 2789 Grade 420/12 (ISO 1083)
- Material of Rotating table shall be Spun Cast Iroh 85 1452 (ISO/R185) or IS:210-1978 or IS:1865:1996 and Fixing Chan 1S:1072:1996 or ISO:4347:1992 with max
- High Tensle Steel strength 49600N Breaking load or min. 400 kgs and all 'O' rings and Rubbers shall be of Nitrite Rubber with BS 2494 type W and spindle buffer shall be of Nitrite EP or EPDM rubber in accordance with BS type W and recommended Stainless Steel Bearing with ASNI 420